636-600-4084
sales@slplighting.com
IMG_5571

General Lighting Products
Wire Guards, Wrap Lenses and Replacement Products

Replacement Lenses

GEN Wraps

SLP offers an extensive replacement wrap program. Wraps with or without End Caps installed, Replacement White or Clear End Caps, Springs and Clips loose or installed.

Injection Molded Wraps

Specification grade injection molded wraparounds designed specifically for applications that require optimum optical control with low brightness. Ideal for public areas such as schools, airports, libraries, retail stores and offices. Linear side prisms control brightness and the small conical male prisms on the bottom minimize lamp image. This design reduces ceiling shadows and sharp contrasts.

VP60 Replacement Lens

Injection Molded for enclosed and gasketed fixtures. Available with or without gaskets.

Drop Lenses

Our precision injection molded drop lenses provide maximum controlled illumination. These 12” x 12” and 20” x 20” lenses have an asymmetrical light distribution designed specifically for service station and parking lot applications where light trespass needs to be controlled.

Citadel 1

Citadel 1TM The traditional damp and wet location enclosure for T5, T8 or T12 lamps. A strip fixture is mounted inside the fiberglass housing paired with an Acrylic impact reistant lens creating a weatherproof enclosure with easy to clean exterior surfaces. Inside the housing brass studs and knockouts match the strip KO locations.

Wire Guards

Strip Fixture

SLP offers a variety of wire guards to fit your needs.  Different cell configurations for different lighting requirements. SLG Series available in Wire Gauge of 11 or 14, Cell Size of 2″x2″ or 2.5″ x 2″. A variety of finishes such as Gloss White, Silver, Gloss Black, or Matte Black.  Nominal Lengths: 2′ or 4′. Standard with 4 Snap Clips available.

High Bay Industrial

SLP offers a variety of wire guards to fit your needs.  Different cell configurations for different lighting requirements. HB Series available in Wire Gauge of 11 or 14, Cell Size of 2″x2″ or 2.5″ x 2″. A variety of finishes such as Gloss White, Silver, Gloss Black, or Matte Black.  Nominal Lengths: 2′, 4′ or 8′. Standard with 4 steel or nylon clips.

Reflector Series

SLP offers a variety of wire guards to fit your needs.  Different cell configurations for different lighting requirements. RS1 is the first line in the reflector series available in Wire Gauge of 11 or 14, Cell Size of 2″x2″ or 2.5″ x 2″. A variety of finishes such as Gloss White, Silver, Gloss Black, or Matte Black.  Nominal Lengths: 2′, 4′ or 8′. Standard with 4 Snap Clips.

Reflector Series II

SLP offers a variety of wire guards to fit your needs.  Different cell configurations for different lighting requirements. RS2 is the second line in the reflector series available in Wire Gauge of 11 or 14, Cell Size of 2″x2″ or 2.5″ x 2″. A variety of finishes such as Gloss White, Silver, Gloss Black, or Matte Black.  Nominal Lengths: 2′, 4′ or 8′. Standard with 4 Snap Clips.

Flat Wire Guard

SLP offers a variety of wire guards to fit your needs.  Different cell configurations for different lighting requirements. FWG Seris is the flat guard available in Wire Gauge of 11 or 14, Cell Size of 2″x2″ or 2.5″ x 2″. A variety of finishes such as Gloss White, Silver, Gloss Black, or Matte Black.

Custom Order

SLP Offers a variety of wire guards to fit your needs.  For shapes and sizes not shown set up a custom wire guard order.  Contact SLP for more details.

Safety Tube Guards

Colored Safety Tubes

Safety Tube Guards are a must for any area in which the debris from a broken lamp cannot be tolerated. Standard for T8* and T12* lamps.

•  Unbreakable Polycarbonate
•  4’ and 8’ Lengths Available.
•  UV Filters
•  Endcaps hold lamps in place and prevent tubes from falling
•  *Colors: Blue, Green, Red, Pink and Bug Yellow

T5HO

The new T5 HO Tube Guard features an increased size and venting endcaps. The increased size allows a greater distance of the guard from the hottest point of the lamp near the end of the lamp. This distance reduces the temperature of the guard material measured at the inside wall of the guard.
The T5 HO Tube Guard is suitable for use with T5 HO lamps in normal operating conditions where the surface of the lamp does not exceed 200°F.