636-600-4084
sales@slplighting.com

SLP Lighting Resources

Photomertrics

SLP Lighting manufactures only a portion of the components that go into building a complete luminaire. The balance of the components that are acquired from other sources make a major impact on the photometric performance of the complete luminaire.

The Photometric Test Data provided here is intended only as a means to compare those products that are offered by SLP Lighting.

The photometric test data offered is in industry standard format and generated by a third party independent testing company. It is the responsibility of others to determine suitability of the provided data for their purposes.

SLP Lighting recommends that customers have their finished luminaires photometrically evaluated to assure that their data reflects the performance based on the specific combination of components utilized.

SLP LIGHTING MAKES NO REPRESENTATIONS OR WARRANTIES EXCEPT AS EXPRESSLY SET FORTH IN THE TERMS AND CONDITIONS, AND SLP LIGHTING EXPRESSLY DISCLAIMS ALL OTHER REPRESENTATIONS AND WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF PHOTOMETRIC PERFORMANCE OF GOODS ASSEMBLED BY OTHERS. NO CUSTOMER OR SUPPLIER OF SLP LIGHTING HAS THE AUTHORITY TO MODIFY OR AMEND THIS LIMITED WARRANTY. IN NO EVENT SHALL SLP LIGHTING BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES, WHETHER AS THE RESULT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE, STRICT LIABILITY, OR ANY OTHER THEORY).

CITADEL Enclosures Protecting lighting against harsh environments. Common components for LED and Fluorescent units.

CITADEL 4s a combination of the Citadel 4™ & 4i™ Enclosures in a smaller unit for tight areas that need LED light.

CITADEL 4i Designed for Industrial Applications. Highly Adaptable and Robust. Completely compatible for LED Boards. Very durable materials.

Wide Gasketed Enclosures For Wet Or Dusty Locations. CITADEL 4™ Designed to minimize the retention of liquids or debris when hosed off. Very durable materials. Completely compatible for LED Boards.

CITADEL 2™ offers more versatility and benefits than any other weatherproof enclosure offered in North America. Fully compatible for LED Applications and high efficiency lighting.

Profile Series

Profile I is a sleek enclosure.

General Lighting Products

Plastic Parabolic, Decorative, Aluminum, Thincell Eggrate louvers. Block LEDs and other forms of lighting with flat sheet lenses. SLP products to cover all your office and retail needs.

UL red
cULus

UL File Recognized Components: Listed wet location components with SLP’s written authorization this information is available for inclusion into your UL Files. Customer is responsible for all related costs as well as on site inspections.

  • UL 5VA: Flammability Test, will not melt or burn
  • UL (f1): Suitable for outdoor use with respect to exposure to Ultraviolet Light, Water Exposure and Immersion in accordance with UL 746C.
NSFCompoenentLogo_Blue

NSF: Tested and Certified by NSF International NSF/ANSI Standard 2: Splash Zone Application

  • Splash Zone: Wet or damp process areas; high pressure purging and/or decontamination used in the process; areas using hose washdown
IP69

IP69:Protected against close-range high pressure, high temperature spray downs

IP67

IP67: Totally protected against dust. Protected against the effects of temporary immersions between 15cm and 1m. Duration of test is 30 minutes.

IP66

IP66: High pressure host test 100 liters of water per minute shot from 1 meter away immediately after de-energizing the unit. Duration of test is 3 minutes.

IP65

IP65: Low pressure hose test, dust tight and protected against strong gets of water.

NEMA 4x: Indoor or outdoor use primarily to provide a degree of protectin against corrosion, windblown dust and rain, spashing water, hose-directed water, and damage from external ice formation.

RoHS

RoHS: Restriction of Hazardous substances Directive: this directive restricts the use of size hazardous materials in the manufacture of various types of electronic and electrical equipment.

1500 PSI: High pressure hose test for 3 minutes.

Citadel Guardian Seal: A unique combination of SLP’s Injection Molded lenses and high performance “poured in place” gasket. This provides the most advanced sealing system available.

DLC-QPL-LISTED-logojpg

DLC: The DesignLights Consortium® (DLC) is a non-profit organization dedicated to accelerating the widespread adoption of high-performing commercial lighting solutions. The DLC promotes high-quality, energy-efficient lighting products in collaboration with utilities and energy efficiency program members, manufacturers, lighting designers, and federal, state, and local entities. Through these partnerships, the DLC establishes product quality specifications, facilitates thought leadership, and provides information, education, tools and technical expertise.

  • DLC QPL: DesignLights Consortium® Qualified Products List indicates that certain items are tested as Solid State Lighting products have been DLC qualified and are listed on the QPL

Chemical Resistance

Chemical resistance is a difficult area for any designer due to the fact that the resistance is dependent on so many different factors: concentration, mix of chemicals, humidity, air flow, etc. SLP provides components to many customers and we never know the conditions of the installation.

SLP does publish the material of which parts are made but must leave the suitability to others. We have asked our material suppliers on many occasions if our product will stand up to specific environments and their answer is always the same: It needs to be tested in the exact environment to know how the material will perform.

SLP warranties product to be free from manufacturing defects only.

SLP Lighting Makes No Representations Or Warranties Except As Expressly Set Forth In The Terms And Conditions, And SLP Lighting Expressly Disclaims All Other Representations And Warranties, Express Or Implied, Including Without Limitation Any Warranties Of Fitness For A Particular Application. No Customer Or Supplier Of SLP Lighting Has The Authority To Modify Or Amend This Limited Warranty.

In No Event Shall SLP Lighting Be Liable For Any Indirect, Special, Incidental, Consequential, Or Punitive Damages, Even If Informed Of The Possibility Of Such Damages, Whether As The Result Of Breach Of Contract, Warranty, Tort (Including Negligence, Strict Liability, Or Any Other Theory)

SLP Lighting is always striving to imporve our products and diversify our line of components with education, promotion and complimentary partners.

Component Partners

Philips Easelect

BJB

Covestro